Motor          Trilogy Linear Motor and LEM Encoder Module

Amplifier     Model    7228AC

TrilogyT2S.jpg (242266 bytes)

Firmware    Version:    1.1

Software      Copley Motion Explorer       Version  1.2.4

Wiring

Note     1]         Connect Motor’s thermal switch between /Motemp ( J2-9 ) and Signal Ground ( J2-12 )
for shutdown with motor overtemperature

Note     2]         Trilogy LEM Encoder Module requires external +5 VDC @ 1 A  ( Not supplied

Motor                  Specifications at Trilogy:      http://www.trilogysystems.com/

Screen shown for demonstration purposes only!
Tuning for motors and/or applications must be done by the customer.
For custom tuning performed by Copley, contact sales@copleycontrols.com